HP Identity Driven Manager Software Series - Manual (Page 98)

3-34
Using Identity Driven Manager
Configuring Access Profiles
3. If you want the IDM QoS attributes to override the switch attributes, use the QoS
list to select the quality of service or priority for outbound traffic of users in
groups associated with the access profile. QoS ranges from lowest to highest,
with Normal being the default.
4. In the Ingress rate-limit field, select the maximum bandwidth or rate limit
allocated for traffic from users assigned to the Access Policy Group using the
Access Profile. The default setting is 1000 Kbps (1 Mbps), which is translated
to a percentage of bandwidth at the switch.
5. In the Egress rate-limit field, select the maximum bandwidth or rate limit
allocated for traffic to users assigned to the Access Policy Group using the
Access Profile. The default setting is 1000 Kbps (1 Mbps), which is translated
to a percentage of bandwidth at the switch.
6. To assign the Network Resources, click Edit. This launches the Network
Resource Assignment Wizard.
Figure 3-25. Network Resource Assignment Wizard
7. Click Next to continue to the Allowed Network Resources window.