HP Identity Driven Manager Software Series - Manual (Page 136)

3-72
Using Identity Driven Manager
Adding RADIUS Clients
Figure 3-48. Add RADIUS Client Wizard, RADIUS Parameters
To configure RADIUS parameters for a single client:
a. In the RADIUS clients list on the left, select the RADIUS client that you
want to configure.
b. Select up to three RADIUS server parameters check boxes to represent the
number of RADIUS servers where the specified client will be configured.
c. For each server, use the RADIUS server list to select the short name of the
RADIUS client in the RADIUS server. Only RADIUS servers that can be
configured for this RADIUS client are listed (those that weren't discarded
for a specific RADIUS client in the Duplicate RADIUS Client step).
d. For each server, in the Shared secret and Confirmed secret fields, type the
secret key that will be used to authenticate the client on the RADIUS server.
e. To unmask the shared secret, select the Show secrets check box.
f. Click Next.
To configure RADIUS parameters for all listed clients: