HP Identity Driven Manager Software Series - Manual (Page 61)

2-45
Getting Started
Monitoring User Session Information
synchronizes on Group A or Group B, User 1 is imported into the group with the
higher priority. If IDM synchronizes on Group d or Group y, the User 1 is not
imported.
7. On the Add or Remove Groups window, select the groups to sync in the Groups
in Active Directory column and click the >> button to move them to the Groups
to Synchronize column.
8. When you have selected all the groups you want to sync, click OK.
9. On the User Directory Settings window, for each group that you have added,
select whether users should be imported from AD into the IDM database. Select:
•
Yes to import users, such as 802.1X or hybrid users
OR
• No (SNAC Only) to not import SNAC users. SNAC users will not be imported
since they are added to the IDM database when they register for SNAC
10. Click Move Up and/or Move Down to set the priority that IDM uses to apply the
access level. If a user is in multiple groups in AD, IDM uses this list to determine
which group’s access level to apply to the user. The access profile that is applied
to the user is the one for the group that is the highest in the list.
11. When you have finished making the changes, click:
• Apply to apply the changes and keep the window open. The status of the
changes is displayed in the AD Status area. You may see a message such as
Connected.. Imported 50 users. When the changes are complete, the Listen-
ing for updates message is redisplayed.
OR
• OK to apply your changes and close the window.