HP Identity Driven Manager Software Series User Manual
Page 191
4-13
Using the Secure Access Wizard
Using Secure Access Wizard
If a device does not support the selected setting, the value you set will appear
in the SAW display, but will not be configured on that device.
e. Click OK to save the advanced settings and close the window.
f.
Click Next in the configuration window to continue to the
Authentication Servers step.
Server timeout The authentication server response timeout (default 30 sec). Valid
values are 1-300.
Max requests
The maximum number of times the switch retransmits
authentication requests. Valid values are 1-10, the default value is
2.
Re-auth period The re-authentication timeout (in seconds, default 0), set to 0 to
disable re-authentication. Valid values are 0-999999999
Quiet period
The period of time the switch does not try to acquire a supplicant.
Valid values are 0-65535, the default value is 60 sec.
Unauth-vid
The VLAN to which the port is assigned when the user has not
been authorized by 802.1X authentication. Valid values are any
defined VLAN, the default value is VLAN 1
Auth-vid
The VLAN to which the port is assigned when the user has been
authorized by 802.1X authentication. Valid values are any defined
VLAN, the default value is VLAN 1.
Option
Configures....