HP Identity Driven Manager Software Series - Manual (Page 90)

3-26
Using Identity Driven Manager
Configuring Network Resources
Figure 3-20. Network Resources
The Network Resources window lists the name and parameters for defined resources,
including:
Double-click the Network Resource from the list, or select it from the navigation
tree, to display individual Network Resource configuration details.
Table 3-3. Network Resources parameters
Column Displays...
Name The name used to identify the resource
IP Address The IP Address for the switch associated with the resource ("any" if the
resource is being filtered by protocol).
Network Mask The subnet mask for the IP Address.
Ports The device port(s) associated with the resource or Any if the resource is
being filtered by protocol.
Ports can be selected by number, or friendly port name. Refer to the section
on "Using Friendly (Optional) Port Names" in the
Management and
Configuration Guide for your switch for details.
Protocol The protocol (UDP, TCP, or IP) used to filter access to the resource.