HP Identity Driven Manager Software Series - Manual (Page 192)

4-14
Using the Secure Access Wizard
Using Secure Access Wizard
23. The Web-Auth Configuration window lets you select the RADIUS authentica-
tion method settings to be applied in the secure access settings for Wireless
Services Modules (2.x or higher).
Figure 4-10. Secure Access Wizard, Web-Auth Configuration
a. Click the radio button to select the RADIUS authentication protocol.
Only one of the following methods can be applied:
–
Use PAP-capable RADIUS server for Web-Auth
– Use CHAP-capable RADIUS server for Web-Auth
b. Click the Advanced Settings for Wired Web-Auth link to configure the
advanced settings for Web-Auth on wired devices. (See figure 4-11 on the
next page).
c. Click the check box to select the setting to configure, then enter the
parameter to be applied.
When a parameter is configured, the Reset to default values option is
enabled. Click the link to restore the advanced settings for wired Web-Auth
defaults.