HP Identity Driven Manager Software Series - Manual (Page 134)

3-70
Using Identity Driven Manager
Adding RADIUS Clients
4. Select the PCM switches to be configured as RADIUS clients on the selected
RADIUS servers.
Figure 3-47. Add RADIUS Client Wizard, Device Selection
a. Use the Available devices drop-down to display the devices by model.
b. From the Available devices list, select the IP addresses of the PCM
switches that will be added as RADIUS clients.
This list displays all discovered PCM switches and their additional network
interfaces (treated as manually added client). Sort the devices by IP address
or Model by clicking the column heading.
c. Click >> to move the selected switches to the Selected devices list.
d. To add a manually added client, type the IP address of the switch in the IP
Address field on the right and click Add.
e. When all switches you want to add as RADIUS clients are shown in the
Selected devices list, click Next.
5. If duplicate IP addresses are found, select the action to take for duplicate IP
addresses.
a. To update the existing client with parameters you specify, select Update All.
b. To retain the existing client parameters and end the wizard, select Discard
All.