HP Identity Driven Manager Software Series - Manual (Page 14)

1-8
Welcome to Identity Driven Manager
IDM Specifications
IDM Specifications
Supported Devices
For a list of IDM 4.0 features supported on HP Networking devices, refer to “Device
Support for IDM Features” on page
A-1.
Operating Requirements
For operating requirements, refer to the “Supported IDM Environments” section in
the PCM+ 4.0 Installation and Getting Started Guide.
Additional Requirements
■
Implementation of an access control method, using either MAC-auth, Web-
auth, or an 802.1X supplicant application.
For assistance with implementation of RADIUS and access control methods for
use with PCM switches, refer to the Access Security Guide that came with your
switch. All PCM switch manuals can also be downloaded from the PCM web
site.
For assistance with using RADIUS and 802.1X access control methods, contact
the PCM Elite Partner nearest to you that can provide PCM+ Access Control
Security solutions. You can find PCM Direct Elite partners on the Find a Partner
link at http://www.hp.com/networking
.
■
If you plan to restrict user access to specific network segments, you will
need to configure VLANs within your network. For information on using
VLANs, refer to the HP PCM+ 4.0 Network Administrator’s Guide, or the
configuration guides that came with your switch.