HP Identity Driven Manager Software Series - Manual (Page 193)

4-15
Using the Secure Access Wizard
Using Secure Access Wizard
Figure 4-11. Secure Access Wizard, Advanced Wired Web-Auth
Advanced Web-Auth settings for wired devices include:
Option Configures....
DHCP address
and mask The base address and mask for the temporary pool used by DHCP
(base DHCP address default is 192.168.0.0, and the mask default
is 24 - 255.255.255.0).
Redirect URL The URL that the user should be redirected to after successful
login. The default is no redirect (blank field).
DHCP lease The lease length (days) of the IP address issued by DHCP (default
10). Valid values are 5-25.
Client limit The maximum number of clients to allow on one port
simultaneously, default is 1. This option is available only when at
least one device supports Client Limit in the OK status in the IDM
Agent.
Re-auth period The re-authentication timeout (in seconds, default 0), set to 0 to
disable re-authentication. Valid values are 0-999999999.