HP StoreAll Storage User Manual

Page 96

Text mode
Original mode

On the Host Servers page, select the servers that will host the configuration profile.

On the Settings page, configure the FTP parameters that apply to the share. The parameters are
added to the file serving nodes hosting the configuration profile. Also enter the IP addresses and
ports that clients will use to access the share. For High Availability, specify the IP address of a VIF
having a VIF backup.

NOTE:

The allowed ports are 21 (FTP) and 990 (FTPS).

NOTE:

If you need to allow NAT connections to the share, use the Modify FTP Share dialog box

after the share is created.

Using FTP