HP StoreAll Storage - Manual (Page 104)

•
Ensure that all users who are given read or write access to HTTP shares have sufficient access
permissions at the file system level for the directories exposed as shares.
•
For High Availability, when specifying IP addresses for accessing a share, use IP addresses
for VIFs having VIF backups. See the administrator guide for your system for information about
creating VIFs.
Managing HTTP from the GUI
Configuring HTTP
Use the Add New File Share Wizard to configure HTTP. You can then view or modify the
configuration as necessary.
On the GUI, select File Shares from the Navigator to open the File Shares panel, and then click
Add to start the Add New File Share Wizard.
On the File Share page, select HTTP as the File Sharing Protocol. Select the file system, which must
be mounted, and enter a share name and the default directory path for the share.
On the Config Profile page, select on existing profile or configure a new profile, specifying a name
and the appropriate parameters for the profile.
104 Using HTTP