Custom paper sizes, Select margins options – HP Designjet T7100 Printer series User Manual

Page 91

Custom paper sizes

To choose a non-standard paper size not shown in the list of paper sizes:

●

Under Windows, there are three different ways:

◦

In the driver dialog, press the Custom button in the Paper/Quality tab, then specify the

name and the dimensions of your new paper size, then click Save to save your new paper

size. In the PostScript driver, to see your new custom size in the list of custom sizes, you need

to exit the printer properties, then reenter them (and use the More button if necessary).

NOTE:

The driver will not allow you to create a paper size whose width exceeds its length.

◦

From the Start menu, select Printers, then from the File menu select Server Properties.

In the Forms tab, check the Create a new form box, specify the name and dimensions of
the new form, then click Save Form.

NOTE:

Such forms are not available when using a shared printer that is connected to a

different computer.

●

In the Mac OS Page Setup dialog: select Paper Size > Manage Custom Sizes.

NOTE:

If your application offers no Page Setup dialog, please use the Print dialog.

●

On the Embedded Web Server's Submit Job page: select Advanced settings >

Paper > Page size > Custom.

Select margins options

By default, the printer leaves a 5 mm (0.02 in) margin between the edges of your image and the edges

of the paper, although the top margin is set to 11.5 mm (0.45 in) when printing on glossy paper. You

can change this behavior in several ways.

●

In the Windows driver dialog: select the Paper/Quality tab and then the Margins/

Layout button.

TIP:

In the Windows PostScript driver, make sure you have made the right choice from the

Document size list. You should select a 'no margins' document size if you intend to use the

Oversize or Clip contents by margins options.

●

In the Mac OS X Print dialog: select the Margins/Layout panel.

●

On the Embedded Web Server's Submit Job page: select Advanced settings >

Paper > Layout/Margins.

●

Using the front panel: select the Setup menu icon

, then Printing preferences >

Margins > Select margins.

NOTE:

If you have set the margins from your computer, that overrides any margin setting in the

front panel.

You will then see at least some of the following options.

ENWW

Select margins options

Print o

tio