HP Designjet T7100 Printer series - Manual (Page 112)

NOTE: These front panel settings can all be overridden by the printer driver or Embedded Web
Server job submission settings.
● Color/Grayscale: you can choose to print in color or in shades of gray. Default: Print in
color.
● Select RGB source profile: you can choose from a selection of RGB source profiles recognized
by the printer. Default: sRGB (HP).
● Emulate printer: you can choose to emulate a different HP Designjet printer. Default: Off (no
printer emulation).
TIP: If you have old HP-GL/2 or PostScript files made for a different HP Designjet printer, you
can send them to the printer and use the front panel to turn on the appropriate emulation mode.
PostScript or PDF jobs only
● Select CMYK source profile: you can choose from a selection of CMYK source profiles
recognized by the printer. Default: Europe ISO Coated FOGRA27.
● Select rendering intent: you can select the rendering intent. Default: Perceptual.
● Black point compensation: you can turn black point compensation on or off. Default: On.
● HP Professional PANTONE Emulation: you can turn HP Professional PANTONE Emulation
on or off. Default: On.
104 Chapter 9 Color management ENWW
Color management