Printer software – HP Designjet T7100 Printer series User Manual
Page 16
4. Form feed and cut
key: see
Feed and cut the paper on page 38
5. Front-panel display
displays errors, warnings and information on using your printer.
6. Back
key: To go to the previous step in a procedure or interaction. To go to the upper level, or
leave the option in the menu, or when given an option.
7. Menu
key: Press to return to the main menu of the front-panel display. If you are already on the
main menu it will display the status screen.
8. Down
key: To go down in a menu or option, or to decrease a value, for example when
configuring the front-panel display contrast or the IP address.
9. Power
key: To turn the printer off or on, it also has a light to indicate the printer's status. If the
power key light is off the printer is off. If the power key light is blinking green, the printer is
starting up. If the power key light is green on, the printer is on. If the power key light is amber on,
the printer is in standby. If the power key light is blinking amber, the printer needs attention.
10. Cancel
key: To abort a procedure or interaction.
11. Up
key: To go up in a menu or option, or to increase a value, for example when configuring the
front-panel display contrast or the IP address.
12. OK
key: To confirm an action while in a procedure or interaction. To enter in a submenu in the
menu. To select a value when given an option. If the status screen is displayed, this key takes you
to the main menu.
13. Status
light: Indicates the printer's status. If the
Status
light is solid green, the printer is ready. If it is
flashing green, the printer is busy. If it is solid amber, there is a system error. If it is flashing
amber, the printer needs attention.
To highlight an item in the front-panel display, press the
Up
or
Down
key until the item is highlighted.
To select an item in the front-panel display, first highlight it and then press the
OK
key.
When this guide shows a series of front-panel display items like this: Item1 > Item2 > Item3, it
means that you should select Item1, then select Item2, then select Item3.
For detailed information on the front-panel menus, see
.
For an annotated list of front-panel error messages, see
Front-panel error messages on page 196
.
Information about specific uses of the front panel can be found throughout this guide.
Printer software
The following software is provided with your printer:
●
HP-GL/2 printer driver for Windows operating systems
●
PostScript printer driver for Windows, Linux and Mac OS operating systems (with the PostScript
upgrade)
●
HP Utility (see
The HP Utility’s main features on page 10
)
●
The Embedded Web Server, which runs in the printer and enables you to use a Web browser on
any computer to check the ink levels and the printer status (see
The Embedded Web Server’s main
TIP:
See
if you are using Linux.
8
Chapter 1 Introduction
ENWW
In
tr
od
u
ctio
n