HP Designjet T7100 Printer series - Manual (Page 137)

7. Press the Margins/Layout button and select a layout option.
If the job is 10 mm smaller in both dimensions than the page size you have chosen, select
Standard margins. See Select margins options on page 83 .
If the job is the same size as the page you have chosen, but has at least 5 mm of white space
around the edges, select Clip contents by margins.
If the job is the same size as the page you have chosen, and does not have 5 mm of white space
around the edges, select Oversize. The final output will be larger than the page you selected, but
you can cut the print to the correct size without losing any of it.
8. Select the Features tab, then select the Autorotate option and the Crop lines option.
Autorotation can help to avoid wasting paper, and the crop lines will show you where to cut the
paper after printing.
ENWW Print a presentation 129
Printing examples