HP Designjet T7100 Printer series - Manual (Page 205)

Table B-1 Text messages (continued)
Message Recommendation
PDL Error: Job clipped The image is too large for the paper or for the printer. Load
larger paper if possible, or reduce the image size.
PDL Error: memory full Restart the printer and try resending the job; if necessary,
reduce the complexity of the job.
PDL Error: out of paper Load more paper.
PDL Error: parsing error The print job is unintelligible to the printer. Try to recreate and
resend it. Check your cable connections.
PDL Error: print mode error The paper type or print quality specified for the job are
incorrect. Change the loaded paper type or the print settings.
PDL Error: printing error Try sending the job again.
PDL Error: virtual memory full Restart the printer and try resending the job; if necessary,
reduce the complexity of the job.
Replace [color] ink cartridge The cartridge is out of ink; replace it. See Remove an ink
cartridge on page 48 and Insert an ink cartridge on page 50 .
Replace faulty [color] ink cartridge The cartridge is faulty; replace it. See Remove an ink cartridge
on page 48 and Insert an ink cartridge on page 50 .
Reseat [color] cartridge Remove and reinsert the same cartridge. See Remove an ink
cartridge on page 48 and Insert an ink cartridge on page 50 .
Update: failed. Invalid file Make sure that you have selected the correct firmware update
file. Then try again to perform the update.
Under certain circumstances, a front-panel numeric error message appears. Follow the advice in the
Recommendation column to resolve the error.
If an error message appears on the front panel that is not included in this list, turn off the printer and
then turn it back on. If the problem persists, contact HP Support. See HP Customer Care on page 180 .
Table B-2 Numeric error messages
Error code Recommendation
26.n.01 (where n = the subject ink
cartridge number) Remove the subject ink cartridge and reinstall it in the printer. If the error persists,
replace the subject ink cartridge. If the problem persists, contact HP Support. See
HP Customer Care on page 180 .
29.01 The maintenance cartridge is not inserted correctly. Open the maintenance
cartridge door on the right side of the printer, make sure that the maintenance
cartridge is correctly seated, and then close the door. If the problem persists,
replace the maintenance cartridge. If the problem persists, contact HP Support. See
HP Customer Care on page 180 .
ENWW 197
Error messages