HP Designjet T7100 Printer series - Manual (Page 71)

CAUTION: A message appears on the front panel when the maintenance cartridge is almost full and
again when it is completely full and must be changed. You can ignore the alert and continue printing
by pressing the OK button on the front panel. However, HP strongly recommends that you change the
maintenance cartridge when prompted. Ignoring the alert can result in serious damage to the printer.
WARNING! Make sure that the printer wheels are locked (the brake lever is pressed down) to
prevent the printer from moving.
1.
At the front panel, select the icon, then select Replace maintenance ctg.
2. The maintenance cartridge is located in a slot underneath the front panel, at the front of the
printer. Open the door.
3. The maintenance cartridge has a handle on the front. To remove the cartridge, press inward and
upward as indicated by the arrow, until the cartridge is released.
ENWW Work with ink system components 63
Ha
nd
le
the
ink sys
tem