HP Designjet T7100 Printer series - Manual (Page 83)

Clean the stacker rollers
WARNING! The stacker becomes hot during use. Before cleaning, switch it off and give it time to
cool.
Ink tends to stick to the main stacker roller and the small output rollers, which should therefore be
cleaned regularly using a fabric cloth dampened with water.
The frequency with which cleaning is needed depends to some extent on the paper type in use.
● For plain, coated or heavyweight coated paper, once a month may be sufficient.
● For translucent, vellum, glossy or natural tracing paper, cleaning may be required once a week
even with the slowest print modes.
Move or store the stacker
Before moving or storing the stacker, take a couple of steps to reduce the amount of space it occupies.
1. Undo the screws at either side of the stacker tray, and let the tray hang vertically.
ENWW Clean the stacker rollers 75
Stacker