HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 58)

Command line 58
Item Description
Examples
->set profile MyProfile Name=MyNewProfileName
Changes the name of a server profile
->set profile Profile1 EFIState=absent
Removes EFI partition block information from a profile
Item Description
show profile Display all server profiles that exist in the domain and a summary of the associated
Ethernet, iSCSI, FC, and FCoE connections. To view detailed information for the
connections, use the show enet-connection,show iscsi-connection,
show fc-connection, and show fcoe-connection commands,
respectively.
Syntax
show profile [ | *]
Parameter
ProfileName
(optional)
The name of an existing profile in the VC domain. "*" displays all the existing
profiles. If not specified, a summary of all the profiles appears.
Examples
->show profile
Displays a summary listing of all server profiles
->show profile *
Displays detailed information for all profiles
->show profile MyProfile
Displays detailed information for a specific profile
Item Description
unassign profile Unassign a server profile from a device bay.
Syntax
unassign profile
Parameter
ProfileName
(required)
The name of a server profile that is currently assigned to a device bay
Example
->unassign profile MyProfile1
Unassigns a server profile from a device bay
server
Manage server blades.
Supported actions: help, poweroff, poweron, reboot, show
Item Description
poweroff server Power off one or more physical servers.
Syntax
poweroff server [-Force |
-ForceOnTimeout] [-timeout=]
Parameter
ServerID (required) The reference ID of a physical server in the domain. The format of the server ID is
.
If the Enclosure ID is not provided, then the primary or local enclosure is used by
default. "*" powers off all servers in the domain.
For a multi-blade server, the ServerID must be that of the monarch bay. This is the ID