HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 60)

Command line 60
Item Description
Powers on a specific multi-blade server that occupies bays 1-4 of the primary
enclosure
Item Description
reboot server Reboot one or more physical servers.
Syntax
reboot server [-Force]
[-ForceOnTimeout] [-timeout=
Parameter
ServerID (required) The reference ID of a server in the domain. The format of the server ID is
. If the Enclosure ID is not provided, then the
primary or local enclosure (enc0) is used by default. "*" reboots all servers in the
domain.
For a multi-blade server, the ServerID must be that of the monarch bay. This is the ID
displayed by the show server command.
Options
Force Forces a reboot operation without waiting for the OS to shut down gracefully. This
option should be used only as a last resort because it can cause potential data loss
on the server.
ForceOnTimeout Attempts a graceful shutdown, but if the server does not shut down within the
timeout period (default is 60 seconds), then the server is forced to reboot.
Timeout Specifies the timeout period (in seconds) to wait for the operation to complete (per
server). The default timeout is 120 seconds.
Examples
->reboot server 2
Reboots the specific server in device bay 2 of the primary enclosure
->reboot server enc0:2 -force
Reboots a server using the force option
->reboot server * -ForceOnTimeout -timeout=180
Reboots all servers using the ForceOnTimeout option and a custom timeout
->reboot server *
Reboots all servers in the domain
->reboot server enc0:*
Reboots all servers in a specific enclosure
->reboot server enc0:1
Reboots a specific multi-blade server that occupies bays 1-4 of the primary
enclosure
Item Description
show server Display all servers in the domain.
Syntax
show server
Parameter
ServerID (optional) The reference ID of a server in the domain. The format of the server ID is
. If the EnclosureID is not provided, then the primary or local
enclosure is used by default.
For a multi-blade server, the ServerID must be that of the monarch bay. This is the ID
shown in the summary listing.
Examples
->show server
Displays a summary listing of all servers
->show server *