HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 36)

Command line 36
Item Description
Parameter
ConnectionID
(optional)
The ID of an existing FCoE connection. The ID format is .
can be used to display all the FCoE connections of a profile.
'*' displays all the FCoE connections existing in the domain.
Examples
->show fcoe-connection
Displays all FCoE connections existing in the domain
->show fcoe-connection Profile1:*
Displays FCoE connections of profile Profile1
->show fcoe-connection Profile1:1
Displays a specific FCoE connection of profile Profile1
firmware
Display the Virtual Connection firmware version.
Support actions: help, show
show firmware Display the firmware information for all interconnect modules in the domain.
Syntax
show firmware
Examples
->show firmware
Displays a summary listing of all firmware
->show firmware *
Displays a detailed listing of all firmware
To update firmware, use the HP BladeSystem c-Class Virtual Connect Support Utility. For more information on
installing the firmware, see the HP BladeSystem c-Class Virtual Connect Support Utility documentation on the
HP website (
http://www.hp.com/go/bladesystem/documentation ).
igmp
Manage Ethernet IGMP Snooping settings.
Supported actions: help, set, show
Item Description
set igmp Modify Ethernet IGMP Snooping settings.
Syntax
set igmp [Enabled=] [Timeout=]
Properties
Enabled
(optional)
Enables or disables IGMP Snooping. Valid values include "true" and "false".
Timeout
(optional)
The idle timeout interval (in seconds) for IGMP Snooping. Valid values include integers
from 1-3600. The default IGMP idle timeout is 260 seconds.
Examples
->set igmp Enabled=true
Enables IGMP Snooping
->set igmp Enabled=true Timeout=30
Enables IGMP Snooping and sets the idle timeout