HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 80)

Command line 80
Supported actions: help, reset
Item Description
reset vcm Reset the Virtual Connect Manager. A failover to the standby VCM may also
be specified (optional), if there is a standby VCM available.
IMPORTANT: Resetting the VCM causes a temporary loss in connectivity with
the Virtual Connect Manager. If failover is specified and there is a standby
VCM, users are logged off and must reconnect using the standby VCM IP
address.
Syntax
reset vcm [-failover]
Option
Failover Forces a failover from the current primary Virtual Connect Manager to the
standby manager
Examples
->reset vcm
Resets the Virtual Connect Manager
->reset vcm -failover
Resets the Virtual Connect Manager and forces a failover to the standby
VCM (if available)
version
Display CLI version information.
Supported actions: help, show
Item Description
show version Display CLI version information.
Syntax
show version
Example
->show version
Displays CLI version and copyright information
Help subsystem
The help subsystem consists of three options:
• Help summary—lists all supported actions and a short description of each:
>help (or ?)
add
add an element to an existing object
assign assign a server profile to a device bay
. . .
• Subcommand help—displays help details associated with a specific subcommand, including supported
managed elements:
>assign -help (or assign ?)
assign a server profile to a device bay
Managed Elements:
profile
Examples: