HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 73)

Command line 73
Item Description
->save supportinfo address=tftp://192.168.10.12
Saves a support information file to a remote TFTP server
->save supportinfo
address=ftp://user:[email protected]
Saves a support information file to a remote FTP server
systemlog
View the Virtual Connect Manager system event log.
Supported actions: help, show
Item Description
show systemlog Display the Virtual Connect manager system log.
Syntax
show systemlog [-Last=] [-First=] [-Pause=]
Options
Last Display the last n records. If this option is specified and no value is provided, the
default is the last 10 records.
First Display the first n records. If this option is specified and no value is provided, the
default is the first 10 records.
Pause Number of records to be viewed before prompting for key press. Valid values
include numbers between 1 and 40.
Examples
->show systemlog
Displays the entire system log
->show systemlog -pause=8
Displays the system log, eight records at a time
->show systemlog -first=12
Displays the first twelve records from the system log
->show systemlog -last=8
Displays the last eight records from the system log
->show systemlog -last=20 -pause=6
Displays the last twenty records from the system log, six records at a time
To add a remote target, see "add log-target (on page 48 )."
uplinkport
Manage interconnect module uplink ports.
Supported actions: add, help, remove, set, show
Item Description
add uplinkport Add a new uplink port to an existing network or a shared uplink port set.
Syntax
add uplinkport [Network= |
UplinkSet=]
[Speed=]
[Role=]
Parameter
PortID (required) The ID of an uplink port to add. The ID is a combination of the enclosure name,
interconnect bay, and port number in a single descriptor. The format of the port ID is