HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 104)

Command line 104
Object type
connUnitPortStatCountRxElements
Description The number of octets or bytes that have been received by this port in 1-second periodic
polling of the port. This value is saved and compared with the next polled value to
compute net throughput. For Fibre Channel, ordered sets are not included in the count.
::= { connUnitPortStatEntry 7 }
BYTESTRANSMITTED
Object type
connUnitPortStatCountTxElements
Description The number of octets or bytes that have been transmitted by this port in 1-second
periodic polling of the port. This value is saved and compared with the next polled
value to compute net throughput. For Fibre Channel, ordered sets are not included in
the count.
::= { connUnitPortStatEntry 6 }
CLASS3DISCARDS
Object type
connUnitPortStatCountClass3Discards
Description The number of Class 3 Frames that are discarded upon reception at this port. No FBSY
or FRJT is generated for Class 3 Frames. They are discarded if they cannot be
delivered.
::= { connUnitPortStatEntry 28 }
CRCERRORS
Object type
connUnitPortStatCountInvalidCRC
Description The number of frames received with an invalid CRC. This count is part of the LESB.
(FC-PH 29.8). Loop ports should not count CRC errors passing through when
monitoring.
::= { connUnitPortStatEntry 40 }
DELIMITERERRORS
Object type
connUnitPortStatCountDelimiterErrors
Description The number of invalid frame delimiters received at this port, for example, a frame with
a class 2 at the start and a class 3 at the end.
::= { connUnitPortStatEntry 49 }
ENCODINGDISPARITYERRORS
Object type
connUnitPortStatCountEncodingDisparityErrors
Description The number of disparity errors received at this port
::= { connUnitPortStatEntry 50 }
FBSYSFRAMES
Object type
connUnitPortStatCountFBSYFrames
Description The number of times that FBSY is returned to this port as a result of a frame that cannot
be delivered to the other end of the link. FBSY is returned to the port if either the Fabric
or the destination port is temporarily busy. Port can occur only on SOFc1 frames (the
frames that establish a connection). This is the sum of all classes. If you cannot keep the
by class counters, then keep the sum counters.
::= { connUnitPortStatEntry 10 }