HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 33)

Command line 33
Item Description
->set fc-connection BlueProfile 1 BootPriority=Primary
BootPort=50:06:0B:00:00:C2:62:00 BootLun=5
Changes the SAN boot priority and sets additional boot parameters
Item Description
show fc-connection Display the FC SAN connections associated with the server profiles.
Syntax
show fc-connection []
Parameter
ConnectionID
(optional)
The ID of an existing FC SAN connection. The ID format is .
can be used to display all the FC SAN connections of a
profile. '*' displays all the FC SAN connections existing in the domain.
Examples
->show fc-connection
Displays all FC SAN connections existing in the domain
->show fc-connection Profile1:*
Displays FC SAN connections of profile Profile1
->show fc-connection Profile1:1
Displays a specific FC SAN connection of profile Profile1
fcoe-connection
Manage FCoE connections.
Supported actions: add, help, remove, set, show
Item Description
add fcoe-connection Add a new FCoE connection to an existing server profile.
For more information, see "General requirements for adding FC or FCoE
connections (on page
119 )."
Syntax
add fcoe-connection [Fabric=]
[SpeedType=<1Gb|2Gb|4Gb|8Gb|Custom|Disabled>]
[CustomSpeed=<100Mb-10Gb>]
[WWNAddressType=]
[PortWWN=] [NodeWWN=]
[MACAddressType=]
[EthernetMac=]
Parameter
ProfileName (required) The name of an existing profile to which the new connection is added
Properties
Fabric (optional) The name of an existing fabric created on an FCoE module to associate with the
connection. If the fabric name is not specified, then the connection is marked as
“Unassigned” but associated with a specific bay.
SpeedType (optional) The requested operation speed for the server port. Valid values include "1Gb",
"2Gb", "4Gb", "8Gb", "Custom", and "Disabled". The default value is "4Gb".
If the SpeedType is "Custom", the user can configure any speed from 100Mb to
10Gb in 100Mb increments.
CustomSpeed (required
if SpeedType is Custom)
The user-defined speed for the server port. Valid values include 100Mb-10Gb
configured in 100Mb increments.
WWNAddressType The source of WWN address assignments to be used during the creation of the