HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 125)

Configuring the Virtual Connect domain using the CLI 125
Operation Examples
Display overall domain status
>show status
Display stacking link configuration and status >show stackinglink
Display the system log
>show systemlog
Display a list of servers in the domain • Summary display
>show server
• Detailed display
>show server *
• Single server display
>show server enc0:1
Display server profiles • Summary display
>show profile
• Detailed display
>show profile *
• Single profile display
>show profile MyProfile
Delete the domain configuration
>delete domain
Force a failover to the standby VC Manager
>reset vcm - failover
Power off server blades
>poweroff server enc0:2
>poweroff server *
Power on server blades
>poweron server enc0:1
>poweron server *
Reset a server blade
>reboot server enc0:4
>reboot server *
Unassign a server profile from a device bay
>unassign profile MyProfile
Modify Ethernet network connection properties >set enet-connection MyProfile 1 pxe=disabled
Modify FC fabric connections
>set fc-connection MyProfile 2 speed=auto
Resetting the Virtual Connect Manager
To reset the Virtual Connect Manager, use the reset vcm command:
>reset vcm
>reset vcm [-failover]
Administrator privileges are required for this operation.
If VC Ethernet Modules are configured for redundancy using a primary and secondary Ethernet module, the
user can use this feature to manually change which Virtual Connect Ethernet Module hosts the Virtual Connect
Manager. The feature can also force the Virtual Connect manager to restart without switching to the alternate
Virtual Connect Ethernet module. This feature can be useful when troubleshooting the Virtual Connect
manager. The network and FC processing of the Virtual Connect subsystem is not disturbed during the restart
or failover of the Virtual Connect Manager.
If the command line option -failover is included in the reset vcm command and a Virtual Connect
Ethernet secondary module is available, the command line displays the following message:
SUCCESS: The Virtual Connect Manager is being reset. Please wait...
The user is logged out of the session after approximately 1 minute. An attempted login to the same Virtual
Connect Ethernet Module is rejected with the following message: