Changes from vc 3.00 to 3.10 – HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem User Manual
Page 6

Introduction 6
Command
Changes
Virtual Connect 3.10 Virtual Connect 3.15
set fabric
10Gb/24-Port Module
supports both the Auto
and Manual Login
Re-Distribution
schemes, whereas
other FC modules only
support the Manual
Login Re-Distribution
scheme.
10Gb/24-Port Module
is present in the help
file, but it is not
supported.
Module, HP VC 4Gb FC
Module, HP VC 8Gb
20-Port FC Module, and
HP VC 8Gb 24-Port FC
Module only support the
Manual Login
Re-Distribution scheme.
The HP VC FlexFabric
10Gb/24-Port Module
supports both the Auto
and Manual Login
Re-Distribution schemes
add fabric
set fabric
The HP VC FlexFabric
10Gb/24-Port Module
is present in the help
file, but it is not
supported
For the HP VC FlexFabric
10Gb/24-Port Module,
valid speed values
include: 'Auto', '2Gb',
'4Gb' and '8Gb'
help fcoe-connection
add fcoe-connection
remove fcoe-connection
set fcoe-connection
show fcoe-connection
The new object
"fcoe-connection" is
supported in VC 3.15,
allowing you to add,
remove, set, and show
FCoE fabric
connections.
Not supported
All these commands are
supported.
add profile
By default, FCoE
connections are added
when creating a
profile in VC 3.15.
The
"NoDefaultFcoeConn"
option was added to
the "add profile"
command to change
this default behavior.
Not supported, but the
help shows this option.
add profile
[-NoDefaultEnetConn]
[-NoDefaultFcConn]
[-NoDefaultFcoeConn]
[SNType=
[SerialNumber=
show statistics
Adding DCBX status to
port statistics
No DCBX status
Adding DCBX Status:
Application Protocol
Status
Overall Status
Pending Status
Priority Flow Control
State
Priority Group State
Changes from VC 3.00 to 3.10
Command
Changes
Virtual Connect 3.00 Virtual Connect 3.10
set fc-connection
In VC 3.10, "BootPort"
and "BootLun"
attributes are required
if Boot Priority is set to
"Primary" or
BootPort—Optional
BootLun—Optional
BootPort—Required if the
Boot Priority is set to
either Primary or
Secondary
BootLun—Required if the
- Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem