HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 103)

Command line 103
Name RFC Description
port
numRxLCs N/A Number of link control frames received
at this port
numRxOfflineSequence
s FCMGMT-
MIB connUnitPortStatCountRxOfflineSequenc
es - Count of Offline Primitive OLS
received at this port
rxBytePeakRate
N/A Receive max byte rate since last reset -
(bytes/sec)
rxByteRate N/A Receive instantaneous byte rate -
(bytes/sec)
rxFramePeakRate N/A Receive max frame rate since last reset –
(frames/sec)
rxFrameRate N/A Receive instantaneous frame rate -
(frames/sec)
samplingRate N/A This controls the rate of statistics
sampling in switch ports. Polling must
be frequent enough to avoid counter
overflow for errors and tx/rx bytes
sfpStatus
N/A SFP status.
txBytePeakRate N/A Transmission max byte rate since last
reset - (bytes/sec)
txByteRate N/A Receive instantaneous byte rate -
(bytes/sec)
txFramePeakRate N/A Transmission max frame rate since last
reset - (frames/sec)
txFrameRate N/A Transmission instantaneous frame rate -
(frames/sec)
Downlink ports
Statistics are not currently available for downlink Fibre Channel ports.
Fibre Channel modules
ADDRESSERRORS
Object type
connUnitPortStatCountAddressErrors
Description The number of frames received with unknown addresses, for example, unknown SID or
DID. The SID or DID is not known to the routing algorithm.
::= { connUnitPortStatEntry 48 }
BBCREDITZERO
Object type
connUnitPortStatCountBBCreditZero
Description
The number of transitions in or out of the BBcredit zero state. The other side does not
provide any credit.
::= { connUnitPortStatEntry 8 }
BYTESRECEIVED