HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 34)

Command line 34
Item Description
(optional) new connection. If not specified, the default is the domain default. If
"UserDefined" is specified, then both a Port WWN and Node WWN must also
be specified. Valid values include "Factory-Default" and "User-Defined".
PortWWN (required if
WWNAddressType is
User-Defined)
The user-defined Port WWN address to use for the connection. The PortWWN
must be an unused WWN address.
NodeWWN (required if
WWNAddressType is
User-Defined)
The user-defined Node WWN address to use for the connection. The
NodeWWN must be an unused WWN address.
MACAddressType
(optional)
The source of MAC address assignments to be used during the creation of the
new connection. If not specified, the default is the domain default. If
"UserDefined" is specified, then EthernetMAC must also be specified. Valid
values include "Factory-Default" and "User-Defined".
EthernetMAC (required
if MACAddressType is
User-Defined)
The user-defined Ethernet MAC address to use for the connection.
Examples
->add fcoe-connection MyNewProfile Fabric=SAN_5
Adds a new FCoE connection to a profile
->add fcoe-connection MyNewProfile Fabric=SomeFabric
SpeedType=4Gb
Adds a new FCoE connection and configures the port speed
->add fcoe-connection MyNewProfile
Adds a new FCoE connection and leaves it unassigned
->add fc-connection MyNewProfile Fabric=MyFabric
SpeedType=Custom CustomSpeed=5000
Adds a new FCoE connection and sets the speed type to Custom
->add fcoe-connection MyNewProfile
WWNAddressType=Factory-Default
Adds a new FCoE connection and uses factory-default WWN addresses
->add fcoe-connection MyNewProfile
WWNAddressType=User-Defined
PortWWN=50:06:0B:00:00:C2:62:00
NodeWWN=50:06:0B:00:00:C2:62:01
Adds a new FCoE connection and provides user-defined WWN addresses
->add fcoe-connection MyNewProfile
MACAddressType=Factory-Default
Adds a new FCoE connection and uses factory-default MAC addresses
->add fcoe-connection MyNewProfile
MACAddressType=User-Defined
EthernetMAC=00-17-A4-77-00-00
Adds a new FCoE connection and provides a user-defined MAC address
Item Description
remove fcoe-connection Remove the last FCoE connection from an existing server profile.
Syntax
remove fcoe-connection
Parameter
ProfileName (required) The name of an existing profile from which the last FCoE connection is to be
removed
Example
->remove fcoe-connection MyProfile
Removes an FCoE connection from a profile