HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem User Manual
Page 101

Command line 101
Name
RFC
Description
numBBCreditZero
FCMGMT-
MIB
connUnitPortStatCountBBCreditZero -
Count of transitions in/out of BBcredit
zero state. The other side is not
providing any credit.
numBytesRx
N/A
Total number of bytes received.
numBytesTx
N/A
Total number of bytes transmitted.
numCRCErrors
FCMGMT-
MIB
connUnitPortStatCountInvalidCRC -
Count of frames received with invalid
CRC. This count is part of the Link Error
Status Block (LESB). (FC-PH 29.8). Loop
ports should not count CRC errors
passing through when monitoring.
numClass3Discards
FCMGMT-
MIB
connUnitPortStatCountClass3Discards -
Count of Class 3 Frames that were
discarded upon reception at this port.
There is no FBSY or FRJT generated for
Class 3 Frames. They are simply
discarded if they cannot be delivered.
numEncodingDisparityE
rrors
FCMGMT-
MIB
connUnitPortStatCountEncodingDisparit
yErrors - Count of disparity errors
received at this port.
numFBSYFrames
FCMGMT-
MIB
connUnitPortStatCountFBSYFrames -
Count of times that FBSY was returned to
this port as a result of a frame that could
not be delivered to the other end of the
link. This occurs if either the Fabric or the
destination port is temporarily busy. Port
can only occur on SOFc1 frames (the
frames that establish a connection). This
is the sum of all classes.
numFRJTFrames
FCMGMT-
MIB
connUnitPortStatCountFRJTFrames -
Count of times that FRJT was returned to
this port as a result of a Frame that was
rejected by the fabric. This is the total for
all classes.
numFramesTooLong
FCMGMT-
MIB
connUnitPortStatCountFramesTooLong -
Count of frames received at this port
where the frame length was greater than
what was agreed to in FLOGI/PLOGI.
This could be caused by losing the end of
frame delimiter.
numInputBuffersFull
FCMGMT-
MIB
connUnitPortStatCountInputBuffersFull -
Count of occurrences when all input
buffers of a port were full and outbound
buffer-to-buffer credit transitioned to
zero. There is no credit to provide to
other side.
numInvalidOrderedSets FCMGMT-
MIB
connUnitPortStatCountInvalidOrderedSe
ts - Count of invalid ordered sets
received at port. This count is part of the
Link Error Status Block (LESB). (FC-PH
29.8).
- Virtual Connect 8Gb 20-port Fibre Channel Module for c-Class BladeSystem 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem Virtual Connect Flex-10 10Gb Ethernet Module for c-Class BladeSystem Virtual Connect FlexFabric 10Gb24-port Module for c-Class BladeSystem 4GB Virtual Connect Fibre Channel Module for c-Class BladeSystem