HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 90)

Command line 90
Name RFC Description
octets).
This object can be used as a
reasonable estimate of Ethernet
utilization. If greater precision is
desired, the etherStatsPkts and
etherStatsOctets objects should be
sampled before and after a common
interval. The differences in the
sampled values are Pkts and Octets,
respectively, and the number of
seconds in the interval is Interval.
These values are used to calculate the
Utilization as follows:
Pkts * (9.6 + 6.4) + (Octets * .8)
Utilization = --------------------
Interval * 10,000
The result of this equation is the value
Utilization which is the percent
utilization of the Ethernet segment on
a scale of 0 to 100 percent."
rfc1757_StatsOversizePkts 1757 The total number of packets received
that were longer than 1518 octets
(excluding framing bits, but including
FCS octets) and were otherwise well
formed.
rfc1757_StatsPkts
1757 The total number of packets
(including bad packets, broadcast
packets, and multicast packets)
received.
rfc1757_StatsPkts1024to151
8Octets
1757 The total number of packets
(including bad packets) received that
were between 1024 and 1518
octets in length inclusive (excluding
framing bits but including FCS
octets).
rfc1757_StatsPkts128to255O
ctets
1757 The total number of packets
(including bad packets) received that
were between 128 and 255 octets in
length inclusive (excluding framing
bits but including FCS octets).
rfc1757_StatsPkts256to511O
ctets 1757 The total number of packets
(including bad packets) received that
were between 256 and 511 octets in
length inclusive (excluding framing
bits but including FCS octets).
rfc1757_StatsPkts512to1023
Octets
1757 The total number of packets
(including bad packets) received that
were between 512 and 1023 octets
in length inclusive (excluding framing
bits but including FCS octets).
rfc1757_StatsPkts64Octets 1757 The total number of packets
(including bad packets) received that
were 64 octets in length (excluding