HP LaserJet 3055 - Manual (Page 95)

Changing the default glass-size setting
This setting determines which paper size the flatbed scanner scans when you send a fax from the
scanner. The factory-set default is determined by the region/country in which you purchased the all-
in-one.
To change the default glass-size setting
1. On the all-in-one control panel, press Menu .
2. Use the < or the > button to select Fax setup, and then press .
3. Use the < or the > button to select Fax Send setup, and then press .
4. Use the < or the > button to select Def. Glass size, and then press .
5. Use the < or the > button to select the correct paper size setting: A4 or Letter.
6. Press to save your selection.
Selecting tone-dialing or pulse-dialing mode
Use this procedure to set the all-in-one to tone-dialing or pulse-dialing mode. The factory-set default
is Tone. Do not change this setting unless you know that your telephone line cannot use tone dialing.
To select tone-dialing or pulse-dialing
1. On the all-in-one control panel, press Menu .
2. Use the < or the > button to select Fax setup, and then press .
3. Use the < or the > button to select Fax Send setup, and then press .
4. Use the < or the > button to select Dialing Mode, and then press .
5. Use the < or the > button to select Tone or Pulse, and then press to save your selection.
NOTE The pulse-dialing option is not available in all regions/countries.
ENWW Basic fax features and tasks 77