Using the all-in-one control panel, Changing the default media size and type, To change the default media size – HP LaserJet 3055 User Manual
Page 61

Using the all-in-one control panel
You can configure settings at the all-in-one control panel.
Changing the all-in-one control-panel display language
Use this procedure to print reports or to show messages on the all-in-one control-panel display in a
language other than the default for your country/region.
To change the all-in-one control-panel display language
1.
Press
Menu
.
2.
Use the
<
or the
>
button to select System setup, and then press .
3.
Use the
<
or the
>
button to select Language, and then press .
4.
Use the
<
or the
>
button to select the language that you want.
5.
Press to save your selection.
The all-in-one automatically restarts.
Changing the default media size and type
Set the size and type of media that you usually load in the input tray. The all-in-one uses these
settings for copying, printing reports, printing faxes, and determining autoreduction sizes for incoming
faxes.
To change the default media size
1.
Press
Menu
.
2.
Use the
<
or the
>
button to select System setup, and then press .
3.
Use the
<
or the
>
button to select Paper setup, and then press .
4.
Use the
<
or the
>
button to select Def. paper size, and then press .
5.
Use the
<
or the
>
button to select the size.
6.
Press to save your selection.
ENWW
Using the all-in-one control panel
43