HP LaserJet 3055 - Manual (Page 341)

Control-panel messages
The majority of the control-panel messages are intended to guide the user through typical operation.
The control-panel messages indicate the status of the current operation, and include a page count on
the second line of the display, if appropriate. When the all-in-one is receiving fax data, print data, or
scanning commands, control-panel messages indicate this status. In addition, alert messages,
warning messages, and critical error messages indicate situations that might require some action.
Alert and warning messages
Alert and warning messages appear temporarily and might require the user to acknowledge the
message by pressing to resume or by pressing
Cancel to cancel the job. With certain warnings,
the job might not complete or the print quality might be affected. If the alert or warning message is
related to printing and the auto-continue feature is on, the all-in-one will attempt to resume the
printing job after the warning has appeared for 10 seconds without acknowledgement.
Alert and warning message tables
Table 13-1 Alert and warning messages
Control panel message Description Recommended action
10.0000 Supply error The print cartridge is not installed correctly. 1. Reinstall print cartridge.
2. Power cycle all-in-one.
3. If the problem is not solved, replace
the cartridge.
ADF door is open The ADF lid is open or a sensor is
malfunctioning. Make sure that the ADF lid is closed.
Remove the ADF and reinstall it.
If the message persists, turn off the power
by using the power switch, wait at least 30
seconds, and then turn on the power and
wait for the all-in-one to initialize.
Try another power source.
If the error persists, contact HP Customer
Care. See
HP Customer Care or the
support flyer that came in the all-in-one box.
Canceled copy. Clear document The Cancel button was pressed to cancel
the current job while pages were feeding
from the ADF. The cancel process does not
automatically clear the ADF.
Remove the jammed item. See Jams occur
in the automatic document feeder (ADF) .
Then, clear the items in the ADF tray and
start over.
Canceled scan. Clear document The Cancel button was pressed to cancel
the current job while pages were feeding
from the ADF. The cancel process does not
automatically clear the ADF.
Remove the jammed item. See Jams occur
in the automatic document feeder (ADF) .
Then, clear the items in the ADF tray and
start over.
Canceled send. Clear document The Cancel button was pressed to cancel
the current job while pages were feeding
from the ADF tray. The cancel process
does not automatically clear the ADF.
Remove the jammed item. See Jams occur
in the automatic document feeder (ADF) .
Then, clear the items in the ADF tray and
start over.
Comm. error A fax communication error occurred
between the all-in-one and the sender or
receiver. Allow the all-in-one to retry sending the fax.
Unplug the all-in-one telephone cord from
ENWW Control-panel messages 323