Information pages, Demo page, Usage page – HP LaserJet 3055 User Manual
Page 286: Configuration page
Information pages
Information pages reside within the all-in-one memory. These pages help to diagnose and solve
problems with the all-in-one.
NOTE
If the all-in-one language was not correctly set during installation, you can set the
language manually so the information pages print in one of the supported languages. Change
the language by using HP ToolboxFX. See
Demo page
To print the Demo page, complete the following steps.
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Reports, and then press .
3.
Use the
<
or the
>
button to select Demo page, and then press .
You can also view this page from HP ToolboxFX.
Usage page
The Usage page shows usage statistics, such as the number of copies made from the flatbed
scanner or the automatic document feeder, the number of faxes sent or received, the number of
pages printed, or the number of pages jammed in the automatic document feeder.
You can print a Usage page from the all-in-one or HP ToolboxFX. To print a usage page from the all-
in-one, complete the following steps:
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Reports, and then press .
3.
Use the
<
or the
>
button to select Usage page, and then press .
Configuration page
The Configuration page lists the current settings and properties of the all-in-one. You can print a
Configuration page from the all-in-one or HP ToolboxFX. To print the Configuration page from the all-
in-one, complete the following steps.
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Reports, and then press .
3.
Use the
<
or the
>
button to select Config report, and then press .
268
Chapter 12 Managing the all-in-one and maintenance
ENWW