HP LaserJet 3055 User Manual
Page 344
Control panel message
Description
Recommended action
Make sure that the phone is working by
disconnecting the all-in-one, plugging in a
telephone to the phone line, and making a
voice call.
Turn off error-correction mode (ECM), and
turn off V.34. Ask the sender to resend the
fax. See
Setting the fax-error-correction
Connect the all-in-one to a different phone
line.
If the error persists, contact HP Customer
Care. See
or the
support flyer that came in the all-in-one box.
Fax Send error
An error occurred while trying to send a fax.
Try resending the fax.
Try faxing to another fax number.
Check for a dial tone on the phone line by
pressing
Start Fax
.
Check that the telephone cord is securely
connected by unplugging and replugging
the cord.
Make sure that you are using the telephone
cord that came with the all-in-one.
Make sure that the phone is working by
disconnecting the all-in-one, plugging in a
telephone to the phone line, and making a
voice call.
Connect the all-in-one to a different phone
line.
Set the fax resolution to Standard instead
of the default of Fine. See
If the error persists, contact HP Customer
Care. See
or the
support flyer that came in the all-in-one box.
Fit to Page on flatbed only
The copy reduce/enlarge feature (called
"Fit to Page") applies only to copies made
from the flatbed scanner.
Use the flatbed or select another reduction/
enlargement setting.
Group dial not allowed in group
The speed-dial code that you typed is
programmed for a group. Adding a group-
dial to another group-dial is not allowed.
Add one-touch buttons (programmed as an
individual speed dial) or speed-dial codes
to a group-dial.
Invalid date
An invalid date was entered, such as June
35.
Re-enter the date.
Invalid driver Press
You are using the incorrect printer driver.
Select the printer driver that is appropriate
for your all-in-one.
Invalid entry
Invalid data or response.
Correct the entry.
Table 13-1
Alert and warning messages (continued)
326
Chapter 13 Troubleshooting
ENWW