HP LaserJet 3055 User Manual
Page 90
-or-
If you are finished dialing numbers, go to the next step.
5.
Press
Start Fax
. If the pages that you want to send are in the ADF, then faxing begins
automatically.
6.
If the all-in-one ADF sensor detects that no document is loaded into the ADF input tray, Send
from glass? 1=Yes 2=No appears on the control-panel display. To send the fax from the
flatbed scanner, press
1
to select YES, and then press .
After you press , Load page: X Press appears on the control-panel display. .
7.
If you have already placed the document on the flatbed scanner, press (or place the
document on the flatbed scanner and then press ).
After scanning the page, Another page? 1=Yes 2=No appears on the control-panel display.
8.
If you have more pages to scan, press
1
to select YES, and then repeat step 7 for each page of
the fax job.
-or-
If you are finished, press
2
to select NO.
The all-in-one sends the fax to each fax number. If a number in the group is busy or does not
answer, the all-in-one redials that number based on its redial setting. If all redial attempts fail, the all-
in-one updates the fax activity log by adding the error, and then it proceeds to the next number in the
group.
NOTE
The fax activity log feature is not supported in the software for Windows 98 or
Windows Me, but you can print the fax activity log by using the control panel. For instructions,
see
.
72
Chapter 6 Fax
ENWW