HP LaserJet 3055 - Manual (Page 139)

To make copies with the all-in-one, use the following instructions.
1. Load your document into the automatic document feeder (ADF) input tray. Load documents
face-down into the HP LaserJet 3050 all-in-one ADF input tray, or face-up into the HP LaserJet
3052/3055/3390/3392 all-in-one ADF input tray. The ADF is recommended for copying multiple-
page documents.
HP LaserJet 3052/3055
HP LaserJet 3390/3392
HP LaserJet 3050
-or-
Load your document onto the flatbed scanner (HP LaserJet 3052/3055/3390/3392 all-in-one
only). Load documents face-down (one page at a time) with the upper-left corner of the
document located in the lower-right corner of the glass.
HP LaserJet
HP LaserJet 3390/3392 3052/3055
2. Press Start Copy on the all-in-one control panel to start copying.
3. Repeat the process for each copy.
For more detailed instructions about loading documents onto the flatbed scanner or into the ADF
input tray, see
Loading documents to fax, copy, or scan .
NOTE If a document is loaded in the ADF input tray and a document is also on the flatbed
scanner, the all-in-one automatically scans from the ADF.
Canceling a copy job
To cancel a copy job, press Cancel on the all-in-one control panel. If more than one process is
running, pressing Cancel clears the process that currently appears on the all-in-one control-panel
display.
NOTE If you cancel a copy job, clear the document from the flatbed scanner or from the
automatic document feeder.
ENWW Canceling a copy job 121