HP LaserJet 3055 - Manual (Page 56)

Loading media into the input trays
The following sections describe how to load media into the different input trays.
CAUTION Printing on wrinkled, folded, or damaged media can cause jams. See Guidelines
for using media for more information.
Loading documents to fax, copy, or scan
Use these instructions to load originals into the all-in-one for scanning. For the best quality scans,
use the flatbed scanner.
To load originals onto the flatbed scanner (HP LaserJet 3052/3055/3390/3392 all-in-one only)
1. Make sure that the automatic document feeder (ADF) contains no media.
2. Lift the flatbed scanner cover.
3. Place the original document face-down on the flatbed scanner with the upper-left corner of the
document at the lower-right corner of the glass.
HP LaserJet
HP LaserJet 3390/3392 3052/3055
4. Gently close the lid.
The document is ready to be faxed/copied/scanned.
To load originals into the automatic document feeder (ADF)
NOTE The ADF capacity for the HP LaserJet 3050 all-in-one is up to 30 sheets of 80 g/m 2 or
20 lb media. The ADF capacity for the HP LaserJet 3052/3055/3390/3392 all-in-one is up to
50 sheets of 80 g/m
2 or 20 lb media.
38 Chapter 4 Using the all-in-one ENWW