Setting the fax-error-correction mode, Changing the v.34 setting – HP LaserJet 3055 User Manual
Page 111
Setting the fax-error-correction mode
Usually, the all-in-one monitors the signals on the telephone line while it is sending or receiving a fax.
If the all-in-one detects an error during the transmission and the error-correction setting is On, the all-
in-one can request that the portion of the fax be resent. The factory-set default for error correction is
On.
You should turn off error correction only if you are having trouble sending or receiving a fax, and you
are willing to accept the errors in the transmission. Turning off the setting might be useful when you
are trying to send a fax overseas or receive one from overseas, or if you are using a satellite
telephone connection.
To change the error-correction setting
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Fax setup, and then press .
3.
Use the
<
or the
>
button to select All faxes, and then press .
4.
Use the
<
or the
>
button to select Error correction, and then press .
5.
Use the
<
or the
>
button to select On or Off, and then press to save your selection.
Changing the V.34 setting
The V.34 setting is the modem protocol that the all-in-one uses to send faxes. It is the worldwide
standard for full-duplex modems that send and receive data across telephone lines at up to 33,600
bits per second (bps). The factory-set default for the V.34 setting is On.
You should change the V.34 setting only if you are having trouble sending a fax to or receiving a fax
from a particular device. Turning off the setting might be useful when you are trying to send a fax
overseas, or receive one from overseas, or if you are using a satellite telephone connection.
To change the V.34 setting
1.
On the all-in-one control panel, press
Menu
.
2.
Use the
<
or the
>
button to select Fax setup, and then press .
3.
Use the
<
or the
>
button to select All faxes, and then press .
4.
Use the
<
or the
>
button to select V.34, and then press .
5.
Use the
<
or the
>
button to select On or Off, and then press .
ENWW
Advanced fax features and tasks
93