HP ProLiant DL180 Server - Manual (Page 13)

Configuration 13
o On ML115 G5 servers:
i. Press the down arrow (↓) key to scroll to IPMI Configuration. Press the Enter key.
ii. Scroll to the BMC LAN Configuration menu by pressing the down arrow (↓) key.
iii. Press the Enter key.
iv. Set Share NIC Mode to Enabled.
o On DL160 G5, DL165 G5, and DL185 G5 servers:
i. Press the down arrow (↓) key to scroll to IPMI Configuration. Press the Enter key.
ii. Scroll to the LAN Configuration menu by pressing the down arrow (↓) key.
iii. Press the Enter key.
iv. Set Share NIC Mode to Enabled.
o On SL165z G6 servers:
i. Press the down arrow (↓) key to scroll to IPMI Configuration. Press the Enter key.
ii. Set BMC NIC Allocation to Enabled.
5. To return to the previous screen, press the Esc key, or to save the changes and exit Setup, press the
F10 key.
The dedicated TCP/IP over Ethernet management port, whether dedicated or shared, is a standard
Ethernet 10/100Mb interface that connects to the network using a standard Ethernet cable. Before using
the dedicated management port, you must determine the DHCP IP address, set a static IP address, or use
the default static IP address.
Obtaining a DHCP IP address from the BIOS Setup Utility
By default, LO100 has DHCP enabled and automatically negotiates an IP address. To view the DHCP IP
address, run the BIOS Setup Utility, or retrieve the DHCP IP address using CLP through the serial port
connection. To view the DHCP IP address using the BIOS Setup Utility:
1. Power on the server by pressing the Power On/Off button on the front panel.
2. When POST displays the message, ROM-Based Setup, press the F10 key. If the server has an
administrator password configured, the system prompts you to enter the password. If the server does
not have a password configured, the main screen of the BIOS Setup Utility appears.
3. Press the right arrow (→) key to navigate to the Advanced menu.
4. Press the down arrow (↓) key to scroll to IPMI. Press the Enter key.
5. To obtain the DHCP IP address, choose one of these options:
o On ML110 G5 and ML150 G5 servers:
i. Press the down arrow (↓) key to scroll to the end of the menu to display the DHCP IP address.
ii. Note the DHCP assigned IP address for future reference.
o On ML115 G5 servers:
i. Press the down arrow (↓) key to scroll the BMC LAN Configuration menu. Press the Enter key.
ii. Press the down arrow (↓) key to scroll to the end of the menu to display the DHCP IP address.
iii. Note the DHCP assigned IP address for future reference.
o On DL120 G5 servers:
i. Press the down arrow (↓) key to scroll the LAN Settings menu. Press the Enter key.