HP XP Command View Advanced Edition Software - Manual (Page 115)

Device Scan Scope panel
In this panel, you can scan a storage system volumes that are connected to a host. Specify a scan
target with an SMS storage group name, volume serial number, or device number, and then press
the Scan function key (F6).
Description Item
To specify the target by SMS storage group, specify /, and then in
the input field, enter an SMS storage group name to be scanned.
Specify /, and then without entering an SMS storage group name,
press the Enter key with the cursor on the input field or press the Scan
function key (F6) to display the Storage Group Selection List pop-up
window. A list of selectable SMS storage groups is displayed.
Storage Group
To specify the target by volume serial number, specify /, and then
specify the range of volume serial numbers to be scanned in Start and
End (order of EBCDIC codes).
To scan only one volume, specify the same value for Start and End.
Volser
To specify the targetby device number, specify /, and then specify
the range of device numbers to be scanned in Start and End
(ascending hexadecimal number order).
To scan only one volume, specify the same value for Start and End.
Device Number
When scanning finishes, the number of detected volumes are displayed.
User Guide 115