Avocent Network Device SPC420 - Manual (Page 244)

224 DSView 3 Software Installer/User Guide
Add or delete units Any qualified user Active zone only.
Update unit properties Any qualified user
Active zone only.
NOTE: Appliance IP addresses
must be unique across all zones.
Move units to another zone Any qualified user
To other zones for which he has
access rights.
Use unit operations and tools Any qualified user
Active zone only.
NOTE: If the operation or tool
involves multiple units, all units
must be in the same zone.
View unit groups Any qualified user Active zone only.
Add unit groups Any qualified user
Active zone only.
NOTE: The user group name must
be unique within the active zone,
but can be duplicated in other
zones. When a zone is created,
three groups are automatically
created: global root, unassigned
and personal root.
Delete unit groups Any qualified user
Active zone only.
NOTE: The global root, unassigned
and personal root groups cannot be
deleted.
Assign units to unit groups Any qualified user Active zone only.
Add or remove sites, departments
or locations
Any qualified user
Active zone only.
NOTE: The site, department or
location name must be unique
within the active zone, but can be
duplicated in other zones. If a unit is
moved to another zone, any
associated sites, departments or
locations are deleted.
Import or export units, unit groups,
users, user groups and associated
relationships
Any qualified user To or from the active zone only.
Table 16.1: Unit Actions in a Zone (Continued)
Action User Status Required for Action Zone(s) Affected