Canon XEED SX6000 - Manual (Page 76)

Adjusting the Image
76
Adjusting Keystone Distortion
The D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE button
(WX6000 / SX6000) can be used to correct keystone distortion.
1
Press the D.SHIFT/KEYSTONE button (WUX5000 / WUX4000) or KEYSTONE button
(WX6000 / SX6000) to display the window in the center illustration below.
• Keystone can be adjusted within the range of ±20 degrees. If the keystone distortion is
too large to adjust, move the projector installation position so that it is completely straight.
• The result of keystone adjustment is stored in memory. If you place the projector in the
same position, the keystone adjustment is not necessary.
• Signals are processed digitally when keystone distortion is corrected. The image may
look different from the original one. In addition, the aspect ratio of the image may change.
• Perform keystone distortion correction with the lens shift position in the home position. Cor-
rection will not be performed correctly if the position is not the home position.
Remote control Remote control