Resetting the image shift, Selecting aspect ratio, Types of aspect ratios – Canon XEED SX6000 User Manual
Page 69: Adjusting the image
69
Adjusting the Image
User’s Manual
Projectin
g
an Ima
g
e
Resetting the Image Shift
Perform the following steps to reset the image shift adjustment.
Press the
D.SHIFT/KEYSTONE button (WUX5000 / WUX4000), twice to display the [D.
image shift reset] window.
Then, select [OK] with the
[ ] button and press the OK button.
■Selecting Aspect Ratio
Select [Aspect] based on the input signal type, aspect ratio of the screen and resolution.
For more details about aspect ratios, refer to
.
Types of Aspect Ratios
Auto
The image is projected at the aspect ratio of the input signal. Select this mode for nor-
mal image projection.
Full (WUX5000 / WUX4000)
The image is projected using an input signal aspect ratio of 16:10.
Select this to project computer screen images having an aspect ratio of 16:10
(WUXGA, WSXGA+, WXGA+ and WXGA (1280 x 800)) fully on the screen.
16:10 (WX6000 / SX6000)
The image is projected using an input signal aspect ratio of 16:10.
Select this if an image of 16:10 aspect ratio cannot be correctly projected in [Auto]
mode when using video software.
16:9
The image is projected using an input signal aspect ratio of 16:9. Select this if an image
of 16:9 aspect ratio cannot be correctly projected in [Auto] mode.
4:3
The image is projected using an input signal aspect ratio of 4:3. Select this if an image
of 4:3 aspect ratio cannot be correctly projected in [Auto] mode.
Zoom
This cuts the upper/lower or left/right part of the image according to the screen aspect
and zooms in or out of the center of the image. Select this if a letter box is displayed
(black lines at the top/bottom of the screen) when using video software.
True size
The image is projected with the original resolution of the input signal. Select this to
clearly project a computer screen image which has a resolution of WUXGA or lower.
This can only be selected when the screen aspect is 16:10.
There may be some cases when this cannot be selected, depending on the input signal and/or
resolution.
There may be some cases when this cannot be selected, depending on the input signal and/or
resolution.