Canon XEED SX6000 - Manual (Page 2)

2
How to Use This Manual
Thank you for purchasing a Canon projector.
The WUX5000 / WUX4000 / WX6000 / SX6000 Multimedia Projector (hereinafter referred
to as “the projector”) is a high-performance projector that is capable of projecting a high-
resolution computer screen and high-quality digital image on a large screen.
User’s Manual (Operation) / Installation Manual (Installation and Maintenance) (This Man-
ual)
This manual combines the user’s manual and the installation manual for the WUX5000 /
WUX4000 / WX6000 / SX6000 Multimedia Projectors. The user’s manual provides informa-
tion on how to use the projector. The installation manual describes how to install the pro-
jector and connect to a network, as well as perform maintenance. Read this manual
thoroughly to make the most of your projector. Installation of the projector should be per-
formed by a qualified technician. Contact the Canon Customer Support Center for further
information.
Symbols Used in This Manual
Meanings of the symbols used in this manual are as follows.
A precaution about operation or restriction is given here.
These descriptions are for WUX5000 / WUX4000.
These descriptions are for WX6000 / SX6000.
These descriptions are for WUX4000.
These descriptions are for WX6000.
Symbols of Button Operations
The projector can be operated using the buttons on the remote control or on the
side of the projector. The remote control allows you to operate all functions of
the projector. In this document, the button’s operations are shown as below.
Indicate the buttons to be pressed
Adjusting the Image Size
The size of the projected image can be adjusted b
remote control or the
LENS button on the projector.
Change the projector installation position if your de
adjust it with the zoom function. (
P155 )
1 Press either the ZOOM button on the remote control
Remote control Projector
Push twice
Operation of buttons on side of
projector
Remote control button operation Remote control