Canon XEED SX6000 - Manual (Page 170)

Preparing the Remote Control
170
■Mac OS X
1
Open the Apple Menu and select [System Preferences].
2
In the System Preferences window, click [Network] to display the Network window.
3
Select [Built-in Ethernet] and click the [TCP/IP] tab. Make a note of the original net-
work settings (IP address, subnet mask, router, DNS server, etc.).
4
Create a new network environment and set the IP address and subnet mask.
The factory default IP address for the projector is “192.168.254.254”. Set an IP
address which is different from this.
Example
IP address:192.168.254.1
Subnet mask: 255.255.255.0
5
Click [Apply] to close the network preference window.
■Resetting the IP Address Setting of the Computer
Follow the same procedure as for changing the IP address and reset the values to the
original values based on the notes taken before the change.