Canon XEED SX6000 - Manual (Page 187)

187
Setting Up the Network
Installation Manual
Connecting to a Networ
k
■Setting PJLink [PJLink]
From [PJLink] in the setting window, you can set the PJLink functions which are the
standard for projector management on a network. For the setting procedure, refer to
page 177 . For information about PJLink, refer to page 174 .
Item Explanation
Factory default
setting
PJLink Turn the PJLink function on or off. If
OFF is selected, the PJLink func-
tion will be turned off and the other
settings in this window cannot be
changed. ON
PJLink authentication Select whether to turn the PJLink
authentication function on or off. If
OFF is selected, [Password] and
[Confirm password] cannot be
changed. ON
Password Enter the PJLink authentication
password in 1-byte alphanumeric
characters (1 - 32 characters). system
Confirm password For confirmation, enter the same
password that you entered in
[Password]. system