Canon XEED SX6000 - Manual (Page 59)

59
User’s Manual
Projectin
g
an Ima
g
e
Selecting an Input Signal (INPUT)
Select the input signal in the [Input] menu when you want to project a digital PC or AV
equipment signal, or to switch between inputs when multiple computers or multiple sets
of AV equipment are connected.
Skip this step if you have not changed the input signal since the last projection.
■Types of Input Signals
The table below shows the relationship among input signals supported by the projector,
input terminals and connection cables.
Input
signal
Supported
projectors
Input terminal Types of connection cables
HDMI
WUX5000
WUX4000
WX6000
SX6000
HDMI cable (not included)
Digital
PC
WUX5000
WUX4000
DVI cable (not included)
WX6000
SX6000
Analog
PC
Analog
PC-1
WUX5000
WUX4000
WX6000
SX6000
/
COMPONENT IN
VGA cable (supplied)
WUX5000
WUX4000
WX6000
SX6000
/
COMPONENT IN
BNC cable (not included)
Analog
PC-2
WX6000
SX6000
VGA-DVI cable (not included)
Compo-
nent
WUX5000
WUX4000
WX6000
SX6000
/
COMPONENT IN
Component cable (not included)
BNC cable
(not included) Mini D-sub 15-pin - BNC
terminal converter cable
(not included)
D terminal plug - RCA plug
component conversion ca-
ble (not included)
RCA plug - RCA plug com-
ponent cable (not included)