Adjusting the image – Canon XEED SX6000 User Manual
Page 66
Adjusting the Image
66
16:10
Select this when you use a screen with aspect ratio of
16:10. Also, select this when you project an image on
a wall. You can correct keystone distortion with this
mode. (
)
16:9
Select this when you use a screen with aspect ratio of
16:9. You can correct keystone distortion with this
mode. (
)
4:3
Select this when you use a screen with aspect ratio of
4:3. You can correct keystone distortion with this
mode. (
)
16:10 D. image shift (SX6000)
Select when the screen aspect ratio is 16:10. Key-
stone correction cannot be performed in this mode.
However when projecting level, it is possible to shift
the image up or down.
For details about how to shift the image, refer to
16:9 D. image shift
Select this when you use a screen with aspect ratio of 16:9. You cannot correct keystone
distortion in this mode, but you can move the image up or down with images being pro-
jected horizontally.
For the details on how to move the image, refer to
4:3 D. image shift (WUX5000 / WUX4000 / WX6000)
Select this when you use a screen with aspect ratio of 4:3.
You cannot perform the keystone adjustment in this mode; however, you can move the
image to the left or right while projecting the image horizontally.
For the details on how to move the image, refer to
5
Press the OK button to confirm your setting and then press the MENU button.
16:10 screen
16:9 screen
4:3 screen